تیغه جلوی خیش Anchor coulter Turbo Shank Premium برای بذرپاش

Turbo Shank Premium coulter with 15 mm row cleaner.
Designed for use in direct sowing seeders, as well as for mini-till and no-till technology.
The coulter is equipped with a cutting disc that cuts crop residues and plant roots that are in the surface layer of the soil.
On the same hub with the disk, flanges are fixed, which perform three functions:
rolling over the soil surface, they provide copying of the microrelief of the field;
press the stubble residues, facilitating their cutting;
compact the soil surface, which allows the anchor to prepare a neat furrow with less loosening of the soil.
The tip part of the anchor is made of wear-resistant high-strength alloy.
Following the anchor is a plastic seed and fertilizer compactor that presses the seeds tightly to the bottom of the furrow, ensuring their guaranteed contact with moist soil.
After the compactor comes the furrow-closing wheel according to the Chicken-Tracker principle.
   Chicken-Tracker prevents:
creation of air pockets;
excessive compaction of the landing bed;
deep furrow;
dirt sticking to the wheel;
the appearance of a dry crust on dried soil on hot and windy days;
compaction of the soil in conditions of high humidity, which increases the contact of seeds with the soil and favorably affects the uniformity of seedlings.
   Benefits of Chicken Tracker:
prepares beds and softens the soil;
promotes mixing of soil with organic residues using no-till technology;
maintains the uniformity of the introduction of seeds into the soil;
gives uniform placement of seed depth;
excludes reconsolidation of a sowing bed;
has a reliable design;
pressure always falls on 3 points of the tread, which eliminates the adhesion of dirt and seeds to the wheel, and also strengthens the soil around the seedbed;
designed to work on difficult soil (wet, hard ground, organic residues).
   Specifications of the Turbo Shank Premium Anchor Coulter:
Length, mm …………………………………….…1185
Width, mm …...……………………….....….…192
Height, mm …...……………………….....……..1015
Force of pressure on the soil, kg …..…………….350
Anchor width, mm………………………….…15
Press wheel diameter, mm ......... 350
Cutting disc diameter, mm ……...…..…..405
Seeding depth adjustment, cm .................. 2-10
Coulter travel for terrain copying, mm..150
Mounting on the frame of the seeder .... bar 80x80 or 100x100